before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. If you can’t get the print function to work, I think you can use ‘save as’ in Corel to save your design as a .dxf or an .ai file and then use ‘import’ in your laser software to import one of those We do not anticipate any price changes at the moment. The control system and software are the most expensive part of the laser. Unfortunately top American programmers and engineers charge a lot more than Chinese factory workers and all our We guarantee our software and control system makes a huge difference and offer a full 60 day money back guarantee (minus shipping and handling). I can appreciate that… For now everything works fine if I export to .dxf from CorelDraw then import into newlydraw…. works like a charm.. i guess it’s just a convenience thing -superior vector cutting algorithms using state of the art spline trajectory vs traj trajectory of other low end systems .DXF files are only for vector. You cannot output joint vector+raster in DXF. Not only can you output from CorelDraw but even MS Word in vector format under RetinaEngrave. .’ I now have ‘export bmp’ and ‘export plt’ buttons in my corel draw but after selecting the geometry and clicking ‘export’ moshidraw does a lot of thinking and then nothing else happens. I have been searching for the source of the problem for a couple of weeks. It depends on what you are doing. If you are trying to send a vector (cut) file to the Moshi unit, you must first make sure that the drawing is not ‘grouped’. Go to arrange and click on ‘ugroup’. Now hit the ‘export LPT’ button in the plugin and you will see a small square run very quickly around your drawn file. Then the ‘Loading’ icon will come up on the screen. After it is completely loaded, it should automatically go to the Moshi program so you can output the cuts. If you are doing a ‘BMP’ file, first make sure that you have a blank moshi screen. Then you can export the file to Moshi merely by clicking on the ‘export bitmap’ button. If you already have a file on the startup screen in Moshi, and not a blank screen, it will not send it over. With a PLT (vector) file, is should not matter. Any more questions, just ask. FYI, there is a gentleman at We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today! All CNCzone.com Content – Copyright © 2014 – All Rights Reserved CNC Machines,CAD/CAD,Milling Machines,Lathes,Classifieds, Lasers,Engraving,woodworking,MetalWorking Source.